Overview

EtherStretch Lyte Ethernet and PoE Extender – Transmitter side in Weatherproof enclosure

The ET1243CW is an ET1543C transmitter fitted in a weatherproof case. This device sits at the remote side of an EtherStretch Lyte link and connects to the far end PoE-powered 10/100 Ethernet device. The ET1243CW provides 10/100 Ethernet link extension of up to 500m over RG58 or RG6 coaxial cabling. The ET1243CW communicates back to a multi-channel 8,16, or 24-channel receiver at the head end, both of which derive power from the Network PoE switch.

The ET1543CW is normally sold along with the multi-channel ER8200C/ER16200/ER24200C, to match the PoE Switch capacity, one ET1543CW per port. The ET1243CW works differently from the ET15xx series in that both the ET1543CW and receiver channel derive power by drawing it from the PoE link between the PoE switch and the far end device. This requires that the entire link from the PoE switch thru the multi-channel receiver, coax, ET1243CW, and the far-end device is complete before PoE negotiation will happen and power will come up. This design method maximizes the use of the PoE Switch for power and monitoring while achieving weatherproof, economical 10/100 Ethernet extension over coax.

Features

Supports 100Mb and POE over RG59 cables up to distances of 350 meters (1150 feet)
Fully transparent to the network, requiring no IP and Mac addressing
Supports any network device, including megapixel IP cameras
Designed to work with ER8200C/ ER16200C/ ER24200C
LED indicators for network signals, status, and power
Surge Protected input
Ground loop isolation
Easy to set up and install
Limited Lifetime Warranty
Designed, tested, manufactured, and supported in the U.S.A.

Technical Specs

Max Operating Distance

Network Port: 100m
Link Port (over Coax): 350m

System Latency

System Latency: <1mS over 1,000ft RG59

Rating/Listing

UL: IEC/UL 60950-1
NEMA TS-2: Temperature & Humidity NEMA 2.2.7
Mechanical Vibration NEMA 2.2.8
Mechanical Shock NEMA 2.1.2
Operating Frequency NEMA 2.1.3
Transient Test NEMA 2.1.6 thru 2.1.8

Power

Requirements: POE or by 15VDC from the receiver
BTU Rating: 5 BTU/h

LED Connectivity Indicators

LED Connectivity Indicators

Environmental/Temperature

Operating: -40°C to 75° C / -40°F to 167° F
Storage: -40°C to 85°C / -40°F to 185°F
Humidity: Up to 95% non-condensing

Mechanical Dimensions (W x H x L)

ET1243C: 1.2″ x 1.7″ x 3.0″ / 30mm x 40mm x 8mm
WP1325: 252mm x 146mm x 53mm / 9.9″ x 5.7″ x 2.1″

Shipping Dimensions (W x H x L)

6″ x 3″ x 10″ / 152.4mm x 76.2mm x 254mm
Weight: 1.36kg / 3lbs

Warranty Information

Limited Lifetime Warranty