IPPWR1 – Nitek International

Overview

The IPPWR1 is a single channel, in line, 10/100/1000 Ethernet surge protector for IP cameras. In addition to the network protection, the IPPWR1 provides independent protection for 12 or 24-volt power which can be used with heaters, blowers, or PTZ. The IPPWR1 is designed to provide surge protection for one 10/100/1000 Ethernet port. The unit has standard RJ45 jacks for easy connection and is ideal for small or restricted spaces. The IPPWR1 provides a heavy-duty, single-point ground connection and is easy to install in minutes.

Features

Heavy-duty single point ground
1 picosecond clamping time
Will pass POE+ power
Separate power protection
Easy to set up and install
Limited Lifetime Warranty
Designed, tested, manufactured, and supported in the U.S.A.

Technical Specs

Power

IEC380 connector- 110-240VAC/50-60HZ/640 Watt Max
LED Connectivity Indicators: Link Status rack mounting
BTU Rating: 300 Btu/h
Total Power Output: 250 Watts Internal

Mounting

Standard rack mounting

Connection Mode

SFP Port: 2 SFP ports for 1 Gigabit each
Link Port: 16 RJ45 Connectors

System Latency

<1mS over 1,000ft CAT5e
Peak Pulse Power Dissipation
3,00 w/pair (10/100us)

Impedance

50 or 75 Ohms

Environmental / Temperature

Operating: -40°C to 75°C / -40°F to 167°F
Storage: -40°C to 75°C / -40°F to 167°F
Humidity: Up to 90% non-condensing
Relative Humidity: 0% to 95% noncondensing

Mechanical Dimensions (L x W x H)

1.8″ x 2.5″ x 0.9″

Shipping Dimensions (L x W x H)

Package: 8.5″ x 18″ x 24″
Weight: 5.44kg / 12lbs

Warranty Information

Limited Lifetime Warranty