Overview
NITEK offers a wide variety of passive video balun transceivers. A passive transceiver is a non-amplified device that allows the transmission of analog color or monochrome video over ordinary unshielded twisted pair wires such as telephone cable or category rated UTP cabling. NITEK passive video balun transceiver is a non-amplified device that allows the transmission of analog color or monochrome video over ordinary unshielded twisted pair wires such as telephone cable or category rated UTP cabling. NITEK passive video balun transceivers deliver high-quality balanced video signals to the recording devices. A passive video balun can deliver a fully equalized video signal up to 3,000 feet over UTP cable when used with an active receiver. These units are intended for use over existing in-house telephone wiring, Category 5 wiring or other twisted pair cable runs to provide a convenient, cost-effective alternative to coax. They are designed to provide superior immunity from noise and interference due to EMI or RFI, which is often a commercial installation problem.
The HD VB31AT is a unique transmission device that provides an economical means of sending video and camera power over a standard Category cable and has been designed to meet the needs of the HD TVI/CVI/AHD cameras. The Nitek Video and power balun combiner provide video and camera power over a single CAT5 for CCTV twisted pair video transmission up to 750 feet (225 meters) in conventional UTP analog Video applications, 100 meters in TIA/EIA 568 applications.